BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

 
 
Thread Tools
  #1  
Old 09-04-2020, 09:15 PM
Papa Tom Papa Tom is offline
Lurker
 

Join Date: Jun 2020
Location: Kansas City
Posts: 15
Default Fan on the DZ1P57QMJ

Hey,

I had some issues finding the right Head for this engine as it uses a taller head. It's about 73mm. But I finally found one and in the process of installing. I couldn't find my feeler gauge so stopped there and figured I'd check the condition of the belt. I found that the side casing had silicone all the way around it and two washers stacked as spacers. I got it open and this engine has an aluminum fan mounted with the center bolt. I'm not sure if this was original or not as some fins were broken and looked as it rubbed the inner case at one time... hence the spacers.

Anyone else see this before or maybe were to get a new fan. I hadn't started looking yet.

Just coming to vent here first as I'm a little upset with the guy that sold this to my grand daughter for not being forthcoming about apparent issues he had to know about. Such as this case fan problem, the plug threads stripped out shooting out the plug. Most lug bolts cross threaded on rear wheels. I guess I'm too honest of a guy and too trusting as I could never do that to someone. Especially a young mother with a two year old.

https://photos.app.goo.gl/bNBMuhXyzCYs7aWF6
https://photos.app.goo.gl/XsZcjhj88ApnUrKf9
https://photos.app.goo.gl/ZS78A1gjvffpqFUy6
https://photos.app.goo.gl/8MSMjeMP8k9HHHicA

Last edited by Papa Tom; 09-04-2020 at 10:05 PM.
  #2  
Old 09-06-2020, 10:51 PM
metalstudman1's Avatar
metalstudman1 metalstudman1 is offline
Super Moderator
 

Join Date: Aug 2009
Location: Belmont,NC (elevation 534')
Posts: 2,668
Default

I feel for your grand daughter. I actually bought a GY6 that came out of a scooter that had an aluminum flywheel fan- just like yours it had fins broke off. The guy I got it from did tell me he tried to remove it by holding the fins so the motor wouldn't turn when removing the nut and broke them. I think the kick-start type come with that fan- I bet he used the wrong cover thus the washers. I agree about NON-informed individuals that don't disclose their mistakes before pawning off their lack of skills on someone else.They didn't look at forums like this for advise!! I buy "cheap" toys with the assumption that they screwed it up-that's why they're getting rid of it, so I'm not let down too much when it's all screwed up. Stripped bolts and a spark plug is the worst- you're not alone in the aggravation of ignorance.There's nothing common to common sense anymore. Good luck-hope that's the extent of it.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:34 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.