|
|
|
|||||||
| Electrical Tech General Tech for Electrical issues not related to specific engines (Lights etc) |
|
|
Thread Tools |
|
#1
08-03-2009, 02:06 PM
|
||||
|
||||
CDI & Coil Install
Here's a video of a CDI & Coil Install on a Joyner 250cc
It's a basic install for all buggies. The yellow adjustable cdi on this video does not work good on all buggies. Make sure it does. I had to use the High Performance CDI for CN250 and CF-Moto engines. The Black MRP CDI for my HH ss 250cc. http://www.youtube.com/watch?v=Smvs7B_XChI
__________________
Thanks, PatNY 2008 HammerHead Super Sport 250cc 32mm Performance Pumper Carburetor Uni Filter Hammerhead Performance Exhaust 145 Main Jet 40 Pilot Jet 1/4 Fuel line Black MRP CDI MRP Performance Coil NGK Iridium Plug Dr.Pulley HIT Clutch White MRP Main Torque Spring Dr.Pulley Variator Dr.Pulley 19gr. Sliders Kenda Front Max 20 x 7-8 Interco Swamp Lite 22 x 11-10 |
|
#2
08-03-2009, 05:17 PM
|
||||
|
||||
Do the 250's use and AC based CDI or DC?
|
|
#3
08-03-2009, 07:08 PM
|
||||
|
||||
|
All the 250's use DC powered CDI's.
Some DC CDI's will work on both CFMoto 250's and CN250's. So ask before ordering. If you have a SYM250/300, there are no current aftermarket CDI's for this engine. None of the GY6 (150cc) CDI's work on the 250's.
__________________
Thanks, PatNY 2008 HammerHead Super Sport 250cc 32mm Performance Pumper Carburetor Uni Filter Hammerhead Performance Exhaust 145 Main Jet 40 Pilot Jet 1/4 Fuel line Black MRP CDI MRP Performance Coil NGK Iridium Plug Dr.Pulley HIT Clutch White MRP Main Torque Spring Dr.Pulley Variator Dr.Pulley 19gr. Sliders Kenda Front Max 20 x 7-8 Interco Swamp Lite 22 x 11-10 |
|
#4
08-03-2009, 09:15 PM
|
||||
|
||||
|
I'd love to have one of the Carters but I don't think will fit in the back of my truck in the event that I wanted to ride off of my property. Is a SYM a bolt replacement for any of the 250's meaning if I got a HH 250, and a SYM engine, would it drop right in?
|
|
#6
08-15-2009, 12:41 AM
|
||||
|
||||
|
|
|
|
