|
Electrical Tech General Tech for Electrical issues not related to specific engines (Lights etc) |
|
Thread Tools |
#1
|
||||
|
||||
150cc CDI Rewire
Hopefully this might come in handy one day.
150cc CDI Rewire Diagram If ground is connected to pin 3 instead of 4, it is a DC powered model.
__________________
Thanks, PatNY 2008 HammerHead Super Sport 250cc 32mm Performance Pumper Carburetor Uni Filter Hammerhead Performance Exhaust 145 Main Jet 40 Pilot Jet 1/4 Fuel line Black MRP CDI MRP Performance Coil NGK Iridium Plug Dr.Pulley HIT Clutch White MRP Main Torque Spring Dr.Pulley Variator Dr.Pulley 19gr. Sliders Kenda Front Max 20 x 7-8 Interco Swamp Lite 22 x 11-10 Last edited by PatNY; 08-03-2009 at 07:20 PM. |
#2
|
||||
|
||||
Excellent info! Thanks!
|
#3
|
||||
|
||||
thanks
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150 |
#4
|
|||
|
|||
does a Carter talon com with a A/c or a D/c cdi?
|
#5
|
|||
|
|||
mine has 3 & 4 to ground, what in the world is going on?
|
#6
|
||||
|
||||
Measure pin 6 for AC or DC voltage to find out which wiring and model you have.
|
#7
|
||||
|
||||
An ac volt CDI will have 2 wires at the 2 pin plug whereas the DC CDI will only use 1 wire at the plug.
TOM |
|
|