|
|
|
|||||||
| Mini Buggy General Discussion General Discussion forum for Mini Buggies. (American Sportworks, HammerHead, Carter, etc) |
 |
|
|
Thread Tools |
|
#1
06-16-2013, 12:35 AM
|
|||
|
|||
Where do i get a rebuild kit for my roketagk-01
I have a roketa 150 CC gy6. I took it to the shop and they told me the compression was low and o ring was worn out. How do I go about fixing this and where do get the stuff to fix it with? Im trying to get this thing going for my son.
|
|
#2
06-16-2013, 08:21 AM
|
||||
|
||||
|
Welcome to the forum! changing out the piston rings is an easy job and there are videos on you tube that are very detailed on how to do it. The rings for the gy6 150 are plentiful and inexpensive to buy online, If you want to get someone who will be there for you with any questions or real tech support, I suggest you give Tom @ sycpowersports a call, or send him a pm, his banner is at the top of our forum page. He really knows these buggy's and is a true value to this forum, plus you get a nice discount for being a member!
|
|
#3
06-30-2013, 09:15 PM
|
|||
|
|||
|
Im trying to buy the rebuild kit onlne. This is what the site says:IMPORTANT NOTE: THERE IS TWO VARIATIONS OF 150cc CYLINDERS USED! Match your cylinder with the picture below and enter notes in the comment section when checking out which cylinder you need. The bolt patterns are different on these two cylinder jugs and they WILL NOT interchange. The gaskets used are different also. ALL use the same 57mm piston and rings................... Which one do i have. Im not sure which to order or how to tell
|
|
|
|
