BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Classifieds > Parts For Sale / Wanted

Parts For Sale / Wanted All member parts for sale go here regardless of type.

 
 
Thread Tools
  #1  
Old 05-31-2014, 10:47 AM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default Anyone interested in this stuff??

This is all stuff I'm not using any more, so if you see something you want, let me know. All stock parts from a yerfdog Spiderbox. The Mikuni clone carb is a VM 28mm. The tires are brand new Kenda Scorpion 21 7 8 tires with inner tubes. (I have them overinflated because I'm trying to get them back to natural shape. They were really distorted from shipping when they tie wrapped a bunch of them together in storage containers. Should be no problem once they are mounted on rims.

Koso 14 gram rollers

Shocks are from a Honda TRX 200. They mount up perfect on the spiderbox with no mods, but are a little soft for off road. Really good for flat pavement or really light riders.









__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........

Last edited by xlint89; 05-31-2014 at 01:49 PM.
  #2  
Old 05-31-2014, 11:41 AM
SFORCES's Avatar
SFORCES SFORCES is offline
Contributor
 

Join Date: Oct 2010
Posts: 141
Default

What engine is that off of and are any of those transmission parts?
  #3  
Old 05-31-2014, 11:59 AM
JERSEYDEVIL's Avatar
JERSEYDEVIL JERSEYDEVIL is offline
Supporting Vendor
 

Join Date: Feb 2011
Location: port charlotte fl
Posts: 831
Default


how much?
__________________

"LUCIFER" JOYNER JD400,
CROSSHAMMER 250R,
YERF GX150,
CROSSFIRE MBX150,
BMS 800V-TWIN
'16 RZR 900s ,
'17 ACE 900XC,
'99KX250,
'94 KDX200,
'18 SSR SR170TX

  #4  
Old 05-31-2014, 12:30 PM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

is the comet/tav driven a 7-inch dia? if so, lmk price.
  #5  
Old 05-31-2014, 01:43 PM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

Sorry, should have posted more info when I listed this.


Quote:
Originally Posted by SFORCES View Post
What engine is that off of and are any of those transmission parts?
Sorry, all of the parts are from a Yerfdog Spiderbox. Yes there are some trans parts listed

Quote:
Originally Posted by JERSEYDEVIL View Post

how much?
CHEAP!!!! What are you interested in?

Quote:
Originally Posted by x-bird View Post
is the comet/tav driven a 7-inch dia? if so, lmk price.
The driven is stock from the Yerf Spiderbox CVT 5 5/8" O.D.
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
  #6  
Old 05-31-2014, 02:07 PM
JERSEYDEVIL's Avatar
JERSEYDEVIL JERSEYDEVIL is offline
Supporting Vendor
 

Join Date: Feb 2011
Location: port charlotte fl
Posts: 831
Default


maybe all shoot me a pm
__________________

"LUCIFER" JOYNER JD400,
CROSSHAMMER 250R,
YERF GX150,
CROSSFIRE MBX150,
BMS 800V-TWIN
'16 RZR 900s ,
'17 ACE 900XC,
'99KX250,
'94 KDX200,
'18 SSR SR170TX

  #7  
Old 05-31-2014, 03:09 PM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

PM sent. let me know if interested. Thanks
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
  #8  
Old 06-02-2014, 05:19 PM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

There is an agreement in place for the whole lot. Should that fall through, I will let everyone know.

I did also find a Ban Jing performance clutch bell in GC if anyone wants that too.

Looks like this one. http://thumbs2.ebaystatic.com/d/l225...BnLAQOCjow.jpg
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
  #9  
Old 06-02-2014, 10:10 PM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

Parts are SOLD!!!!!



Thank you
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........

Last edited by xlint89; 06-03-2014 at 09:54 PM.
  #10  
Old 06-03-2014, 09:58 PM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

Just found a bunch more stuff. Let me know if interested in this batch.

Stock 150 cyl and piston in good shape

Stock crankshaft in good shape

A 10, A 11 cam, and stock cams

Small muffler from dirt bike

Ban Jing clutch bell

6 and 8 pole stators with flywheels




__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
  #11  
Old 06-04-2014, 07:59 PM
SFORCES's Avatar
SFORCES SFORCES is offline
Contributor
 

Join Date: Oct 2010
Posts: 141
Default

you don't have the screw that goes in the top chain guide that holds it in?
  #12  
Old 06-04-2014, 08:10 PM
SFORCES's Avatar
SFORCES SFORCES is offline
Contributor
 

Join Date: Oct 2010
Posts: 141
Default

Here is a pic of the screw i need
Attached Images
File Type: jpg m150-1003022_2_.jpg (66.0 KB, 2 views)
  #13  
Old 06-04-2014, 10:44 PM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

My basement is a mess right now, but I'll look.

I have a feeling it just went out with the parts I sent out today.

I'll let you know if I find it though.
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
  #14  
Old 06-05-2014, 02:20 AM
SFORCES's Avatar
SFORCES SFORCES is offline
Contributor
 

Join Date: Oct 2010
Posts: 141
Default

ok thanx
  #15  
Old 06-10-2014, 12:23 AM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

Sorry dude. I must have shipped it with the parts that sold.
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
  #16  
Old 06-10-2014, 01:52 AM
SFORCES's Avatar
SFORCES SFORCES is offline
Contributor
 

Join Date: Oct 2010
Posts: 141
Default

ok n/p
  #17  
Old 06-13-2014, 06:17 PM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

Nobody?
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
  #18  
Old 11-12-2015, 09:18 PM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

Back from the dead thread.....

Found some more stuff I'm not using and would like to see it go to someone who will.

Please PM me with any questions

All parts are for/from a Howhit GY6 150cc

1. 6 pole magneto with flywheel.



3. Ban Jing clutch bell. Black "snowflake" design bell posted in pic above

4. Upgraded battery cable wire. Next size larger then stock. 8 GA I believe it is. 3' of red and 4' of black. (no terminals included)

5. Decompression tube



6: Anyone have a BD heavy duty axle? I have spare hardware for you. Hubs and retainers. (My axle bent, so I stripped the parts from it)
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........

Last edited by xlint89; 11-27-2015 at 10:19 PM.
  #19  
Old 11-13-2015, 06:54 AM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

Hi X, i'm looking to convert a 125 to a 150. I'd be after jug, head, piston, cams, valves 8 pole mag and flywheel. 39T sprocket. muffler. I have to double check to see if the stud spacing is the same. I haven't diasassembled the 125 yet.
  #20  
Old 11-13-2015, 10:05 PM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

Let me know. I'll make you a heck of a deal.
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
  #21  
Old 11-14-2015, 06:39 AM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

Will do, got hit with a project at work this weekend after our electrician went MIA and blew the timetable for rough electrical and framing inspections ....stopped the job dead in it's tracks. I've got a buttload of boxes and wire to run over the next two days. Should be able to get into the engine by mid week.
  #22  
Old 11-16-2015, 10:00 PM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

Found some shocks I don't need too.

Photobucket is giving me issues right now. I'll post pics later.,
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
  #23  
Old 11-17-2015, 09:22 PM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

pics are up

__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
  #24  
Old 11-24-2015, 06:07 AM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

Xlint, the head stud spacing on the engine I have is 54 mm, can you checjk the howhit head for me? Thanks
  #25  
Old 11-24-2015, 05:58 PM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

It has 54mm spacing
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
  #26  
Old 11-24-2015, 07:09 PM
scjeep4.7HO scjeep4.7HO is offline
Contributor
 

Join Date: Apr 2015
Location: Virginia
Posts: 197
Default

IHow much for the cams, and clutch bell and 8 pole stator ?

Last edited by scjeep4.7HO; 11-25-2015 at 06:55 AM.
  #27  
Old 11-25-2015, 12:04 AM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

Quote:
Originally Posted by scjeep4.7HO View Post
and clutch ballants 8 pole?
Do you mean clutch bell? and 8 pole magneto/flywheel?
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
  #28  
Old 11-25-2015, 06:56 AM
scjeep4.7HO scjeep4.7HO is offline
Contributor
 

Join Date: Apr 2015
Location: Virginia
Posts: 197
Default

Yes, dang cell phone auto correct.
  #29  
Old 11-25-2015, 07:27 PM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

Only cam I have available is the A10 $10

Ban Jing clutch bell $20

8 pole magneto/FW $10

I'd do all of that for $40 SHIPPED to lower 48
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
  #30  
Old 11-25-2015, 09:41 PM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

pm sent
  #31  
Old 11-26-2015, 08:23 AM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

X Bird, clear your PM box. I can't send a reply.
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
  #32  
Old 11-26-2015, 08:31 AM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

Quote:
Originally Posted by x-bird View Post
I'd be after jug, head, piston, cams, valves 8 pole mag and flywheel. 39T sprocket. muffler. .
The above parts have been spoken for ^^^^^^.
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
  #33  
Old 11-26-2015, 06:05 PM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

Quote:
Originally Posted by xlint89 View Post
X Bird, clear your PM box. I can't send a reply.
took out the trash ... while listening to Alice's Restaurant .... Happy Thanksgiving!
  #34  
Old 11-28-2015, 07:56 AM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

Quote:
Originally Posted by xlint89 View Post
Back from the dead thread.....

Found some more stuff I'm not using and would like to see it go to someone who will.

Please PM me with any questions

All parts are for/from a Howhit GY6 150cc

1. 6 pole magneto with flywheel.



3. Ban Jing clutch bell. Black "snowflake" design bell posted in pic above

4. Upgraded battery cable wire. Next size larger then stock. 8 GA I believe it is. 3' of red and 4' of black. (no terminals included)

5. Decompression tube



6: Anyone have a BD heavy duty axle? I have spare hardware for you. Hubs and retainers. (My axle bent, so I stripped the parts from it)
Parts available has been updated ^^^^^^^

Anyone interested in this stuff?
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top..........
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:30 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.