|
150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
Thread Tools |
#1
|
|||
|
|||
Best Tires For GY6 buggy
Wondering what you all have found to be the best all around tire for all terrain on a gy6 150 buggy?
I have snow, dirt, hills, mud, puddles just all the terrain you could imagine in Idaho. Charles
__________________
Buggy 1 150cc Buggy A12 Cam, 12g Sliders, Ban Jing Bell, NCY Green Clutch, 24mm Carb, 115mm Koso variator ramp, redneck intake, uni filter, straight through exhaust. Guang Max 150 All stock but to be like Buggy 1 with all koso cvt. Roketa 150 Complete tear down building port/polished 61mm NCY head, 62mm cylinder, A12 Cam, 28mm carb, straight through exhaust, 8 pole stator, possibly 2.5 stroker, painting frame, adding plastic including doors and rzr seats. |
#2
|
|||
|
|||
Where at in idaho?
|
#3
|
|||
|
|||
Coeur d Alene, right next to Spokane Washington.
__________________
Buggy 1 150cc Buggy A12 Cam, 12g Sliders, Ban Jing Bell, NCY Green Clutch, 24mm Carb, 115mm Koso variator ramp, redneck intake, uni filter, straight through exhaust. Guang Max 150 All stock but to be like Buggy 1 with all koso cvt. Roketa 150 Complete tear down building port/polished 61mm NCY head, 62mm cylinder, A12 Cam, 28mm carb, straight through exhaust, 8 pole stator, possibly 2.5 stroker, painting frame, adding plastic including doors and rzr seats. |
#4
|
||||
|
||||
I have the Duro Striker tires that work well for me. I believe Kenda also makes a Striker tire, same thread design as the Duro tire.
|
#5
|
|||
|
|||
Sycarms,
Is this the tire? Was having a hard time locating that model. http://www.ebay.com/itm/like/3916657...&ul_noapp=true
__________________
Buggy 1 150cc Buggy A12 Cam, 12g Sliders, Ban Jing Bell, NCY Green Clutch, 24mm Carb, 115mm Koso variator ramp, redneck intake, uni filter, straight through exhaust. Guang Max 150 All stock but to be like Buggy 1 with all koso cvt. Roketa 150 Complete tear down building port/polished 61mm NCY head, 62mm cylinder, A12 Cam, 28mm carb, straight through exhaust, 8 pole stator, possibly 2.5 stroker, painting frame, adding plastic including doors and rzr seats. |
#6
|
|||
|
|||
Im originally from Blackfoot, SE idaho. But live in texas now. Ive seen a lot of guys running those tires on these types of buggies with good luck
|
#7
|
||||
|
||||
Yes it is but I would go with a brand name like Kenda or Duro, they will last a lot longer.
|
#8
|
||||
|
||||
i am running kenda bear claws 23x7 up front and 22x12 in the rear with a 39t axle sprocket, i've have great luck with them and they look great!
|
|
|