Turbo Charger For GY6 125 to 150

[fan4chevy]

Hi all,

Looking for the most possible power without destroying this tiny little cc engine.

Anyone ever tried turbo chargers?

Anyone know much of this kit? http://www.ecotrons.com/products/sma..._turbocharger/

Charles

[neo71665]

Its been done but these little things don't put out enough air to spin the smallest turbos up. You'll basically be just adding an exhaust restriction that looks cool.

Another problem I have is the oiling systems on these things is so low psi it'll never keep a turbo oiled properly.

I also looked into the A.I.R. pump "supercharging" and the parasitic draw will be about as much as the added power pretty much leading it to equal out. Again leaving it to just looking pretty.

Once you have tuned a gy6 to all the commercially produced mods it boils down to there is no replacement for displacement.

[fan4chevy]

Sounds about right.

I am installing the 61mm big bore that you have to bore in by ncy. Sounds like that is the biggest reliable bore and all the reliable big bores need to be bored for.

So I guess that is where I must end it.