Yrf dog 3203/ohh65 oil drain plug

[hgibson]

Hi can any one tell me where the damn oil drain plug is on the yerf dog 3203 please.

[zman007007]

what kind of engine?

[hgibson]

Tecumseh 6.5 hp ohh65

[Masteryota]

Should be a bolt with either a square head or hex head on the bottom of the engine case.

Here is a PDF manual, should get you started.

http://www.manddsmallengine.com/tecu...81-1269-14.pdf

[hgibson]

Thanks every one but I've tried those bolts and no oil comes out. Any suggestions

[x-bird]

add some oil ....

[Masteryota]

+1 for ^^

[hgibson]

I would but it smells like old gas

[hgibson]

And i want it all out and fresh oil

[x-bird]

While my remark may seem a little "wise-guy," seriously, either you've got no oil in that engine, or what's in there is broken down and caked into crud. to see what's going on, remove the pipe-thread style drain plugs and poke a skinny screwdriver in. It may come out with clumpy black on it and some oil may begin to drain. if nothing comes out, you're running without oil.

[hgibson]

the dip stick shows its full of oil. ive tried putting a screw driver down their and nothing happened but ill try it again

[x-bird]

sounds like you're not finding the drain plug.
at the center of the very bottom of the engine, typically one in the front, one in the back, is either a square head pipe plug or a hex (allen) head pipe plug. remove one of those (whichever one will make the least mess and you can get a drain pan under.) These pipe plugs are at the base level of the engine, right next to the mounting plate it's bolted to. usually makes a pretty good mess of things when it drains.

[hgibson]

Thanks for every ones help i got it figured out! I couldn't find the right hex head and i got a bunch of shop tools for Christmas ( i'm 13)

[TheFauxFox]

Alrighty! Another minor on the forums! I'm 14

[hgibson]

yeah!!!!!!