|
|
|
|||||||
| Other tech issues For all other technical issues. Think frame, suspension, steering, brakes, etc |
 |
|
|
Thread Tools |
|
#2
06-08-2012, 09:54 PM
|
||||
|
||||
You can just hook it to a twelve volt battery, if you can't get the wires out of the plug safely you will have to splice them. Hook one side to pos, and the other to ground and measure how far the needle extends. It should extend about 3mm, and the unit should be a little warm.
Now what switch are you talking about?
__________________
T.J. Yerfdog Spiderbox, Uni Type air filter with 6" intake, 130 jet, Orange no-rev limit cdi, Red coil, iridium plug, 1500rpm clutch springs, 1500rpm contra spring, 13g sliders, 22" rears, 21" fronts, aftermarket reverse installed, and Trailtech Vapor. 
|
|
#5
06-09-2012, 06:36 AM
|
|||
|
|||
|
Say thanks mine is missing.Found it dangling.Hole where it goes is plugged with a bolt and silicon.Will start and run but takes a long time and a long time befor the throttle will work.
__________________
 [SIGPIC] Take What You Have and Build What You Need
|
|
|
|
Can anyone tell me how to test and connect this item to the switch.
