BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

 
 
Thread Tools
  #1  
Old 06-13-2020, 06:30 PM
Edgy Edgy is offline
Lurker
 

Join Date: Jun 2020
Posts: 1
Default Helix Fox 150cc main harness

looking for website or where to get a main harness for a Helix Fox 150cc buggy, and I belive has to be DC CDI. The plug to the regulator was melted, what would cause this and can I replace just plug?
  #2  
Old 07-13-2020, 05:23 AM
plee911's Avatar
plee911 plee911 is offline
Contributor
 

Join Date: Feb 2018
Location: Arizona
Posts: 173
Default

The wires on these buggies are undersized and low quality. Good possibility your regulator has gone bad or just an overload to the wires. Order a pig tail and replace the wires with the next size up you wont regret it. Also check all of your grounds and other wires to make sure you have not rubbed a short somewhere.
__________________
Where there is a red neck there is a way.
  #3  
Old 07-14-2020, 10:21 PM
Papa Tom Papa Tom is offline
Lurker
 

Join Date: Jun 2020
Location: Kansas City
Posts: 15
Default

I found what plee911 said to be true.

I just ordered a harness for my buggy and the wires looked to be a gauge or two smaller.

I plan to rewire it myself and get it done right.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:30 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.