|
|
|
|||||||
| 150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
|
Thread Tools |
|
#1
04-23-2015, 10:06 AM
|
|||
|
|||
Wideband on a 150?
Curious what people thoughts are or their experience on a gy6. Looking at the widebands I have ordered and the bungs they came with, it looks like the sensor may sit down a good bit in the exhaust pipe. I have the Hammerhead exhaust which is a little bigger than the stock pipe. Just curious if it will screw with the airflow or if I should find a bung that is a bit taller? Anyone input would be appreciated.
__________________
Trailmaster XRX 150  TK Variator and 1500 Spring  SYC Performance Ported & Polished & Shaved 2 Valve Head, A-10 Camshaft, R2C Filter, and Hammerhead Exhaust  Hammerhead 250GTS White Torque and Clutch Springs, 18g Rollers, R2C Filter, Ported Polished and Shaved Head, Hammerhead Exhaust |
|
#3
04-23-2015, 06:25 PM
|
||||
|
||||
|
Quote:
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
|
#5
04-23-2015, 09:16 PM
|
||||
|
||||
|
Quote:
__________________
Growing old is mandatory  Growing up is optional https://www.youtube.com/watch?v=NEXoa-8d7qE |
|
#6
04-24-2015, 07:31 AM
|
|||
|
|||
|
Quote:
__________________
Trailmaster XRX 150 TK Variator and 1500 Spring SYC Performance Ported & Polished & Shaved 2 Valve Head, A-10 Camshaft, R2C Filter, and Hammerhead Exhaust Hammerhead 250GTS White Torque and Clutch Springs, 18g Rollers, R2C Filter, Ported Polished and Shaved Head, Hammerhead Exhaust |
|
|
