|
|
|
|||||||
| 150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
|
Thread Tools |
|
#1
02-28-2017, 06:40 PM
|
|||
|
|||
Gy6 no spark
I have a helix 150cc dc cdi new cdi plug & stator all the wires ohm out good pick up coil ohms@120.4 ohms im not getting any repsone from the pick up coil. the cdi iw happy has voltage key on . all grounds are good. Even changed wiring same issue thanks for the add any help would be greatly appricated
|
|
#2
02-28-2017, 10:58 PM
|
|||
|
|||
|
If you have power from stator, cdi box, coil, then I would say it is the rectifier.
__________________
Buggy 1 150cc Buggy A12 Cam, 12g Sliders, Ban Jing Bell, NCY Green Clutch, 24mm Carb, 115mm Koso variator ramp, redneck intake, uni filter, straight through exhaust. Guang Max 150 All stock but to be like Buggy 1 with all koso cvt. Roketa 150 Complete tear down building port/polished 61mm NCY head, 62mm cylinder, A12 Cam, 28mm carb, straight through exhaust, 8 pole stator, possibly 2.5 stroker, painting frame, adding plastic including doors and rzr seats. |
|
#4
03-01-2017, 11:03 AM
|
||||
|
||||
|
The rectifier is usually a small black box with 4 wires going into it...mine has the white wire and the yellow wires that come from the magneto plugged into it...it usually sits real close to the CDI box...if u GOOGLE rectifier for gy6 150 it will give u a good idea...hope this helps
|
|
#5
03-01-2017, 11:10 AM
|
|||
|
|||
|
The rectifier is easy to notice as it typically has fins. It is also usually not in the electrical box area but rather bolted to somewhere on the frame in the engine area.
__________________
Buggy 1 150cc Buggy A12 Cam, 12g Sliders, Ban Jing Bell, NCY Green Clutch, 24mm Carb, 115mm Koso variator ramp, redneck intake, uni filter, straight through exhaust. Guang Max 150 All stock but to be like Buggy 1 with all koso cvt. Roketa 150 Complete tear down building port/polished 61mm NCY head, 62mm cylinder, A12 Cam, 28mm carb, straight through exhaust, 8 pole stator, possibly 2.5 stroker, painting frame, adding plastic including doors and rzr seats. |
|
#7
03-01-2017, 10:54 PM
|
|||
|
|||
|
I will test mine and see if I pull the wires from rectifier if it will still start.
__________________
Buggy 1 150cc Buggy A12 Cam, 12g Sliders, Ban Jing Bell, NCY Green Clutch, 24mm Carb, 115mm Koso variator ramp, redneck intake, uni filter, straight through exhaust. Guang Max 150 All stock but to be like Buggy 1 with all koso cvt. Roketa 150 Complete tear down building port/polished 61mm NCY head, 62mm cylinder, A12 Cam, 28mm carb, straight through exhaust, 8 pole stator, possibly 2.5 stroker, painting frame, adding plastic including doors and rzr seats. |
|
|
