|
150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
Thread Tools |
#1
|
|||
|
|||
Reverse Problems on Kinroad 150
my kinroad 150 reverse isn't working, i pulled or the adjustments all the way and still nothing, i hear it trying to grab but nothing. its the outer reverse one. Any ideas what it could be?
|
#2
|
||||
|
||||
if your idle is to fast can't go into reverse
try turning off motor put into reverse adjust idle if you have the plastic shift lever replace with a metal one looks like 1/2 circle on reverse
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
#3
|
||||
|
||||
A lot of machines with external reverse have the cables connected to an arm that is pulled or pushed to engage D / R After time they can use some adjustment. Adjust slightly in one direction and see how it works. Gets worse? Go the other direction.
|
|
|