|
|
|
#1
11-09-2010, 05:37 PM
|
|||
|
|||
Head bolts
Well if it is 16lbs I can't use my ft lbs torque wrench that low so I will proabley use my inch lbs. Or like the good old days, half a turn before breaking. Thanks again. Have to get some picture of my ride so you can see the bling bling I added.
|
|
#2
11-09-2010, 09:47 PM
|
||||
|
||||
i have never used my inch pounds for head bolts i actualy torque to 15# because my ft lbs will not register at 16# but next time i will try my snapon torquemeter for it.thanks for
the idea
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far
|
 |
|
|
