|
|
|
|||||||
| Go Kart General Discussion Forum for general go kart discussion. |
 |
|
|
Thread Tools |
|
#1
11-26-2009, 04:25 PM
|
||||
|
||||
My Carbide after the Mods!
I would have made a longer video, but it was soooo cold outside!
 But, I finally got around to making a video of me driving my carbide after the mods. It's not very long, but I'll probably be making more clips and putting them all together. Current mods: 10g sliders, Uni filter, removed spark arrestor, 1500RPM main clutch spring.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE! Last edited by joshstep1; 11-26-2009 at 04:34 PM. 
|
|
#2
11-26-2009, 04:26 PM
|
||||
|
||||
|
Why wont the youtube thing work?!?!
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#3
11-26-2009, 04:27 PM
|
||||
|
||||
|
It dosent work for me either !
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#4
11-26-2009, 04:29 PM
|
||||
|
||||
|
UGH! That sucks!
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#5
11-26-2009, 04:31 PM
|
||||
|
||||
|
Ok, I provided a link, it works!
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#6
11-26-2009, 04:33 PM
|
||||
|
||||
|
to late iv seen it already lol
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#7
11-26-2009, 04:35 PM
|
||||
|
||||
|
Good!
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#8
11-26-2009, 04:35 PM
|
||||
|
||||
|
that girl has power!!
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#9
11-26-2009, 04:39 PM
|
||||
|
||||
|
Oh yeah!
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#10
11-26-2009, 05:27 PM
|
||||
|
||||
|
looks like it runs pretty good!
I'm not sure why you guys have problems with the you tube thing.
|
|
#11
11-26-2009, 05:51 PM
|
||||
|
||||
|
Heck yeah! This thing is a blast!
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#12
11-26-2009, 07:54 PM
|
||||
|
||||
|
i bet !!XO
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#13
11-26-2009, 07:54 PM
|
||||
|
||||
|
did your last mods help?
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668 FABRICATION ITS HARDER THAN YOU THINK
|
|
#14
11-26-2009, 08:00 PM
|
||||
|
||||
|
Quote:
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#15
11-26-2009, 08:14 PM
|
||||
|
||||
|
cant wait till i get some.......
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#16
11-26-2009, 08:17 PM
|
||||
|
||||
|
Variator mods alone will make a big difference! Yes, a few MPH will be cut off the top end, but the amount of low end power that will be gained will be worth it.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#17
11-26-2009, 08:29 PM
|
||||
|
||||
|
im just doin the yellow 1500 spring no rollers or sliders
i dont want to take off any topend or low end
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#18
11-26-2009, 08:33 PM
|
||||
|
||||
|
The speed the speed that is lost can be gained back.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#19
11-26-2009, 08:36 PM
|
||||
|
||||
|
how?
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#20
11-26-2009, 08:41 PM
|
||||
|
||||
|
Uin filter, no rev cdi, and a high performance clutch will all help regain speed without doing heavy mods to the engine.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#21
11-26-2009, 08:44 PM
|
||||
|
||||
|
no way O_o
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#22
11-26-2009, 08:44 PM
|
||||
|
||||
|
way...
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#23
11-26-2009, 08:45 PM
|
||||
|
||||
|
you dont believe me?
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#24
11-26-2009, 08:46 PM
|
||||
|
||||
|
no i do not! lol sorta kinda
PROVE IT!
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#25
11-26-2009, 08:47 PM
|
||||
|
||||
|
You want me to but all of those parts?!?!? WTF
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#26
11-26-2009, 08:50 PM
|
||||
|
||||
|
just kidding lol
hey dont cuss j/k
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#27
11-26-2009, 08:53 PM
|
||||
|
||||
|
oh yeah...no cussing. maybe ill buy those parts
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#28
11-26-2009, 08:55 PM
|
||||
|
||||
|
how did you know if you didn't buy them before?
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#29
11-26-2009, 08:57 PM
|
||||
|
||||
|
im just going by what people are saying on the forum
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#30
11-26-2009, 08:58 PM
|
||||
|
||||
|
o lol who know for sure!
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#31
11-26-2009, 09:15 PM
|
||||
|
||||
|
Quote:
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668 FABRICATION ITS HARDER THAN YOU THINK
|
|
#32
11-26-2009, 09:16 PM
|
||||
|
||||
|
thanks
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#33
11-26-2009, 09:20 PM
|
||||
|
||||
|
hehe what would happen if it went the wrong way
?
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#34
11-26-2009, 09:22 PM
|
||||
|
||||
|
If I got all of the mods and I lost more speed?
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#35
11-26-2009, 09:24 PM
|
||||
|
||||
|
Quote:
   
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#36
11-27-2009, 12:07 AM
|
|||
|
|||
|
Evan,
I wouldn't recommend getting just a spring and nothing else. You're not going to see much of any performance gain other than maybe a little more mid-range power (but not much). If you don't need more low end, then go with a UNI filter and velocity stack/carb rejet like Josh got. It'll give you more overall power from bottom to top and you'll probably GAIN some top speed and definitely not lose any low end!  It's the level 1 air performance package on my site for GY6.
__________________
- Mike
|
|
#37
11-27-2009, 11:01 AM
|
||||
|
||||
|
yay let me get some money now lol
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#38
11-27-2009, 11:12 AM
|
||||
|
||||
|
how about 10g, like what josh did so i dont lose much top or low?
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#39
11-27-2009, 11:30 AM
|
||||
|
||||
|
It worked for me. My speed loss was only about 5 MPH. But, of corse, that can be regained as I told you.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#40
11-27-2009, 11:35 AM
|
||||
|
||||
|
how bout 11, any one got info on that??
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#41
11-27-2009, 12:16 PM
|
||||
|
||||
|
11g sliders?
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#43
11-27-2009, 12:32 PM
|
||||
|
||||
|
ithink im going to go with 11g sliders and a 1500 rpm yellow koso spring
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#44
11-27-2009, 12:33 PM
|
||||
|
||||
|
from here!!
http://www.buggypartsnw.com
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#45
11-27-2009, 12:46 PM
|
||||
|
||||
|
Hey Mike, how much speed do you think could be gained from a no rev cdi and a racing clutch?
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#46
11-27-2009, 01:07 PM
|
|||
|
|||
|
Bit more top speed and much better clutch engagement when climbing. My buggy went from bogging down and slowing significantly on hills to powering right up them - or digging holes in the side of it from spinning the tires on a hill that was too steep or too loose soil!
__________________
- Mike
|
|
#48
11-27-2009, 01:57 PM
|
||||
|
||||
|
Quote:
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#49
11-27-2009, 01:59 PM
|
|||
|
|||
|
Quote:
Have you done any mods to the CVT area yet? If not, you should consider doing the same things that Josh did and Evan is considering: 10 or 11g slider weights, yellow main spring, and UNI air intake with velocity stack and carburetor rejet. Will cost about $90 shipped and give you a bunch more low end and get you up those hills. Ask Josh about the difference in his buggy!
__________________
- Mike
|
|
#50
11-27-2009, 02:01 PM
|
||||
|
||||
|
to Mike:
I don't know how much better it could get. I just finished driving around the neighborhood, and I found this absolutely awesome hill for climbing and going down. The Carbide did awesome! to Buggyman: If you have a Helix, it is really easy to get more climbing power out of them, at the expense of some top end speed.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#51
11-27-2009, 02:01 PM
|
||||
|
||||
|
Quote:
 
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#52
11-27-2009, 02:03 PM
|
||||
|
||||
|
lol XD
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#53
11-27-2009, 02:04 PM
|
||||
|
||||
|
Buggyman is Evans dad??!?!?!
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#54
11-27-2009, 02:04 PM
|
||||
|
||||
|
yes lol
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#55
11-27-2009, 02:05 PM
|
||||
|
||||
|
Haha lol!
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#56
11-27-2009, 02:06 PM
|
||||
|
||||
|
his names mike too
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#57
11-27-2009, 02:07 PM
|
||||
|
||||
|
I bet it was confusing when I addressed **** Mike as Mike.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#58
11-27-2009, 02:10 PM
|
||||
|
||||
|
to him yeah lolXOOOO_Oo
O -
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#59
11-27-2009, 02:10 PM
|
||||
|
||||
|
dang ti it wouldn't make a cyclopse!
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#60
11-27-2009, 02:11 PM
|
||||
|
||||
|
How can we keep the two straight?
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#61
11-27-2009, 02:13 PM
|
||||
|
||||
|
hmmmmm
my dad can be thing1 and **** can be thing2 lol
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#62
11-27-2009, 02:14 PM
|
||||
|
||||
|
Hey Evan, when do I get promoted to "heavy contributor"?
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#63
11-27-2009, 02:15 PM
|
||||
|
||||
|
when i got like 500 posts lol
i was the first member soo yeah....
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#64
11-27-2009, 02:18 PM
|
||||
|
||||
|
I think I'll be 3rd, only behind you and BuggyMaster.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#65
11-27-2009, 02:19 PM
|
||||
|
||||
|
yep but buggy master is the administrator?!
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#66
11-27-2009, 02:22 PM
|
||||
|
||||
|
But he still made it to 500
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#67
11-27-2009, 02:22 PM
|
||||
|
||||
|
well yeah
SO?!?!?!
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#68
11-27-2009, 02:26 PM
|
||||
|
||||
|
Oh wait now i gotch ya
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#69
11-27-2009, 02:27 PM
|
||||
|
||||
|
in acouple weeks you'll have that promo
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#70
11-27-2009, 02:29 PM
|
||||
|
||||
|
so nothin
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#71
11-27-2009, 02:30 PM
|
||||
|
||||
|
sokay
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#72
04-08-2010, 09:53 AM
|
|||
|
|||
|
Im going to pick up my first dune buggy probably this weekend. It's a used 2007 carbide good shape getting it for $1,000. Does anyone know what are the main things i can to to make it climb decent hills or will it be able to do it? thanks
|
|
#73
04-08-2010, 09:55 AM
|
||||
|
||||
|
Well, you should start with changing the roller weights in it to slider weights, say, 10g, the main clutch spring to a 1500RPM and a Uni air intake and re jet the carb if that hasn't been done already.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#74
04-08-2010, 10:01 AM
|
||||
|
||||
|
If your looking to climb hills, the variator / clutch mods are your best bet.
|
|
#75
04-08-2010, 10:02 AM
|
||||
|
||||
|
Yeeeeeah, what he said.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#76
04-08-2010, 10:27 AM
|
|||
|
|||
|
yeah im getting it for my hunt camp to rip around on. I got 100 acres of basically hydro line hills and some mud terrain but mostly trails. Where can i order the parts i need from TSC? because i know they sell new carbides there.
|
|
#77
04-08-2010, 11:15 AM
|
||||
|
||||
|
No. Not TSC. SYC power sports. Their link is on the homepage. I don't like the site, but, whatever.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#78
04-08-2010, 12:49 PM
|
||||
|
||||
|
josh
looking good buy from mike the supplier ********* olderthan
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far
|
|
|
|
