BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

 
 
Thread Tools
  #1  
Old 07-29-2022, 10:19 PM
BuggySteve68 BuggySteve68 is offline
Lurker
 

Join Date: Jul 2022
Posts: 3
Default HammerHead GT150 issues

Hello everyone....i need some help. i recently bought an older Hammerhead GT150 buggy in decent condition. it ran great for about the first week or so. my son was riding it one day and it just quit running. after looking it over i noticed that the brand new battery was dead and the head lights would stay on even with the key turned off and key removed. i ended up un hooking the battery to get the dim head lights to go off. i took the battery back to where i purchased it and it was tested bad or shorted out. they replaced my battery. after removing the plastic box from the electronics i noticed a bare wire, yellow and red i think that was coming from what looked to me like a CDI ??? someone had put electrical tape on it before and it had slipped off and caused the bare wire to run on the metal chassis. i tapped the wire back up temporarily to see if this was the issue. i attached the new battery to the leads and tried to crank the motor but it wont crank, something is just making a small click noise but it wasnt the solenoid i dont think. my question is this....im sure the bare wire caused some damage to the electrical component but what likely? also, where is the best place to buy parts for these buggies....much appreciated everyone
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:02 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.