|
|
|
|||||||
| 250cc and Above Engine Tech Technical Discussion Forum for 250cc and up Engines |
|
|
Thread Tools |
|
#1
02-22-2014, 10:39 PM
|
|||
|
|||
Help finding new clutch roketa gk 06
I need a new clutch and pulley for my 250 ROketa Gk06. There are so many different ones on ebay and online. No two seem to be the same. I am trying to keep it under $140 for the new one so any ideas where to pick one up? I see some on ebay for around $80 but not sure they will fit.
Thanks for any help. |
|
#2
02-23-2014, 12:31 AM
|
||||
|
||||
|
__________________
Growing old is mandatory  Growing up is optional  https://www.youtube.com/watch?v=NEXoa-8d7qE |
|
#3
02-23-2014, 09:18 AM
|
|||
|
|||
|
So the roketa uses a CN250 then right?
|
|
#4
02-23-2014, 10:45 AM
|
||||
|
||||
|
I am unsure.
__________________
Growing old is mandatory Growing up is optional https://www.youtube.com/watch?v=NEXoa-8d7qE |
|
#5
02-23-2014, 07:52 PM
|
||||
|
||||
|
It is not going to be a genuine CN250, as those are very rare, but likely a clone of the CN250. The CF and CN share some parts, but I am unsure if the clutch is one of them. A google search shows it has the CN designation, as do many of the 250cc buggies have, but in this case, make sure before you order.
Here is a link with pics showing both from a scooter site. http://www.thescooterprofessor.probo...om/thread/1542 Edit: On the clutch, I would keep away from the ebay clutches, as they are for the lighter weight scooters. In this case, you pay for quality.
__________________
ASE Master and Toyota Master Diagnostic Certified Buggy Building Trainee '04 Dazon Raider 150 'modded' Last edited by Masteryota; 02-23-2014 at 07:55 PM. |
|
|
