BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > Electrical Tech

Electrical Tech General Tech for Electrical issues not related to specific engines (Lights etc)

Reply
 
Thread Tools
  #1  
Old 03-13-2016, 08:52 PM
stubbysteve stubbysteve is offline
Lurker
 

Join Date: Feb 2016
Posts: 25
Default wiring on hammerhead

We unplugged the main harness, unplugged kill wire for cdi and had spark. Good spark. My buddy plugged main harness back in to see if ign switch would work,which it didn't. Unplugged main harness but now have no spark. The cdi works on running cart as well as ign coil. I tested the black/red wire from pick up coil and it zapped me. But blue/white wire won't register on my needle type volt meter. We get a spuratic spark but is very light and it doesn't stay firing.

Any ideas?

Last edited by stubbysteve; 03-13-2016 at 08:53 PM. Reason: spelling
Reply With Quote
  #2  
Old 03-14-2016, 09:37 AM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

You have to start at the ign switch and work your way back. I can only assume you have an early 150, please confirm engine and year.

Last edited by SYCARMS; 03-14-2016 at 09:38 AM. Reason: add content
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:39 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.